| Product |
Gauge Range |
Applications |
Benefits |
Pretreatment |
| |
| Super Clear |
|
MELINEX®
455 |
200 to 650 |
Labels, Post Lamination, ID Cards |
Accepts PET coatings and inks |
Slip |
|
|
MELINEX®
456 |
200 to 465 |
Lamination, ID Cards, Labels, Membrane Touch Switch (MTS) |
Accepts PET coatings and inks |
Slip |
|
|
MELINEX®
516 |
250 to 600 |
MTS, Flexible Circuits, Printing Plates |
Good handling, clarity and brilliance, Metallizable |
Slip |
|
|
MELINEX®
6428 |
200 to 650 |
Electronics, Photovoltaics |
|
Adhesion - Aqueous |
|
|
| |
| Clear |
|
|
MELINEX®
AF2 |
400 to 1000 |
Face shields, masks, visors, and other industrial uses |
Super clear film coated both sides with an anti-fog coating. |
Antifog |
|
|
| |
| Slightly Hazy (2.0-20%) |
|
|
MELINEX®
301H |
48 to 120 |
Fiberglass Reinforced Panels, Electrical Laminates, Wire and Cable, Metal Lamination |
One-side heat sealable, high gloss, coextruded, Metallizable |
Heat Seal |
|
|
MELINEX®
313 |
48 to 92 |
Flexible Printed Circuits, Quality Printing |
Printable, good chemical resistance, adhesion |
Adhesion - Solvent |
|
|
MELINEX®
314 |
92 to 200 |
Flexible Printed Circuits, High Quality Printing |
Consistently good handling, two-side adhesion |
Adhesion - Solvent |
|
|
MELINEX®
FRP |
92 |
Fiberglass Reinforced Panels |
Specialized shrinkage |
None |
|
|
MELINEX®
HS2 |
48 to 92 |
Stamping Foil |
Low neckdown and shrinkage, excellent tracking |
None |
|
|
MELINEX®
LSS |
92 to 200 |
Flexible Circuits, Labels, Flat Cable, MTS, Casting, Cable Wrap, Insulation, Release Liner, Fiberglass Reinforced Panels (FRP) |
General purpose, rough surface, excellent slip |
None |
|
|
MELINEX®
S |
48 to 500 |
Flexible Circuits, Labels, Flat Cable, MTS, Casting, Cable Wrap, Insulation, Release Liner, Fiberglass Reinforced Panels (FRP) |
General purpose, rough surface, excellent slip |
None |
|
|
MYLAR®
A951 |
92 to 200 |
Green Sheet Release |
Silicone adhesion for release liner |
Release - Silicone |
|
|
MYLAR®
S |
48 to 500 |
Flexible Circuits, Labels, Flat Cable, MTS, Casting, Cable Wrap, Insulation, Release Liner, Fiberglass Reinforced Panels (FRP) |
General purpose, rough surface, excellent slip |
None |
|
|
| |
| Very Hazy (>20%) |
|
|
MELINEX®
DCS1 |
400 |
Abrasives, Fiberglass Reinforced Panels, Labels, Motors, Post Laminaton, Drumheads, Hot Stamping Foil, Office Products |
Tough, versatile, balanced tensile properties, excellent moisture and chemical resistance over a wide range of temperatures, excellent adhesion of metallized layer |
Antistat |
|
|
MYLAR®
A |
48 to 1400 |
Abrasives, Fiberglass Reinforced Panels, Labels, Motors, Post Laminaton, Drumheads, Hot Stamping Foil, Office Products |
Tough, versatile, balanced tensile properties, excellent moisture and chemical resistance over a wide range of temperatures, excellent adhesion of metallized layer |
None |
|
|
MYLAR®
A601 |
500 |
Green Sheet Release |
Silicone adhesion for release liner |
Release - Silicone |
|
|
MYLAR®
ABOX |
142 to 300 |
Abrasives, Fiberglass Reinforced Panels, Labels, Motors, Post Laminaton, Drumheads, Hot Stamping Foil, Office Products |
Tough, versatile, balanced tensile properties, excellent moisture and chemical resistance over a wide range of temperatures, excellent adhesion of metallized layer |
None |
|
|
| |
| Translucent White (N/A) |
|
|
MELINEX®
475 |
200 |
Abrasives, Labels |
High yield, printable |
Adhesion - Solvent |
|
|
| |
| Opaque White (TLT<30%) |
|
|
MELINEX®
329 |
92 to 1400 |
Engineering Drawing, Specialty Cards, Labels, Bar Codes, Printing Plates |
Pearlescent appearance, excellent yields, Metallizable |
None |
|
|
MELINEX®
339 |
200 to 1000 |
Business Graphics, Wide Format Display, Engineering Drawing, Cards, Labels |
Pearlescent appearance, two-side solvent adhesion |
Adhesion - Solvent |
|
|
MELINEX®
534 |
380 |
Business Graphics, Inkjet Printing, Printing Plates, Photo Base |
Pearlescent appearance, two-side aqueous adhesion |
Adhesion - Aqueous |
|
|
| |
| Matte (46-99%) |
|
|
MELINEX®
378 |
75 to 200 |
Casting/Release, Labels, Fiberglass Reinforced Panels (FRP), Stamping Foil |
20% gloss (92 gauge), textured surface |
None |
|
|
MYLAR®
EB11 |
48 to 300 |
Overlaminates, Office Supplies, Stamping Foil, Graphic Arts, Screen Printing |
Tough specialty films ranging from transparent to translucent, 30% gloss, Metallizable |
None |
|
|
| |
|
|
Show Printable Version