| |
|
Melinex® 534 is an opaque white film with superb handling properties and a unique glossy appearance. It is pre-treated on both surfaces to promote adhesion to aqueous based inks and coatings.
|
| Available Thickness [Gauge] |
|
380
|
|
|
| Property |
Thickness |
Value |
Units |
Test |
|
OPTICAL
|
| Total Light Transmission (TLT) |
380 |
13.0 |
% |
ASTM D1003 |
|
|
|
PHYSICAL
|
| C.O.F. (dynamic) A-B |
380 |
0.32 |
|
ASTM D1894 |
| Elongation at Break MD |
380 |
152 |
% |
ASTM D882A |
| Elongation at Break TD |
380 |
105 |
% |
ASTM D882A |
| Tensile Strength MD (break) |
380 |
20,000 |
psi |
ASTM D882A |
| Tensile Strength MD 5% |
380 |
12,100 |
psi |
ASTM D882A |
| Tensile Strength TD (break) |
380 |
23,400 |
psi |
ASTM D882A |
| Tensile Strength TD 5% |
380 |
12,400 |
psi |
ASTM D882A |
| Yield (nominal) |
380 |
5,200 |
in²/lb |
|
|
|
|
THERMAL
|
| Shrinkage MD (190℃) |
380 |
0.7 |
% |
Unrestrained @ 190℃/5 min |
| Shrinkage TD (190℃) |
380 |
0.6 |
% |
Unrestrained @ 190℃/5 min |
|
|
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867
|
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.
CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.
Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.
|
|
Show Printable Version