| |
|
MELINEX® 339 is an opaque white polyester film with superb handling properties that is pre-treated on both surfaces to promote adhesion to most industrial coatings.
|
|
MELINEX® 339 is used as a base for pressure sensitive labels, photographic printing paper, in security and access cards, in multiple use tickets and in general printing applications.
|
|
UL recognized -
Product has been registered with Underwriters Laboratories
|
| Available Thickness [Gauge] |
|
200; 300; 380; 500; 700; 1000
|
|
|
| Property |
Thickness |
Value |
Units |
Test |
|
OPTICAL
|
| Gloss 45 Degrees |
200-1000 |
40 |
% |
ASTM D1003 |
| Gloss 60 Degrees |
200-1000 |
45 |
% |
ASTM D1003 |
| Total Light Transmission (TLT) |
200 |
12 |
% |
ASTM D1003 |
| Total Light Transmission (TLT) |
300 |
9 |
% |
ASTM D1003 |
| Total Light Transmission (TLT) |
500 |
6 |
% |
ASTM D1003 |
| Total Light Transmission (TLT) |
1000 |
2 |
% |
ASTM D1003 |
| Whiteness |
200 |
100 |
|
ASTM E313-79 |
| Whiteness |
300 |
100 |
|
ASTM E313-79 |
|
|
|
PHYSICAL
|
| Elongation at Break MD |
200-1000 |
115 |
% |
ASTM D882A |
| Elongation at Break TD |
200-1000 |
90 |
% |
ASTM D882A |
| Tensile Strength MD (break) |
200-1000 |
16,000 |
psi |
ASTM D882A |
| Tensile Strength TD (break) |
200-1000 |
19,000 |
psi |
ASTM D882A |
| Yield Strength MD 5% |
200-1000 |
12,000 |
psi |
ASTM D882A |
| Yield Strength TD 5% |
200-1000 |
12,000 |
psi |
ASTM D882A |
|
|
|
THERMAL
|
| Shrinkage MD (190℃) |
200 |
2.8 |
% |
Unrestrained @ 190℃/5 min |
| Shrinkage MD (190℃) |
300-1000 |
1.5 |
% |
Unrestrained @ 190℃/5 min |
| Shrinkage TD (190℃) |
200 |
1.0 |
% |
Unrestrained @ 190℃/5 min |
| Shrinkage TD (190℃) |
300-1000 |
1.5 |
% |
Unrestrained @ 190℃/5 min |
|
|
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867
|
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.
CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.
Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.
|
|
Show Printable Version