| |
|
MELINEX® XST6700 is a super clear high clarity polyester film with good handleability. It is pretreated on one side for ionomer adhesion, and the other side for print ink adhesion.
|
| Available Thickness [Gauge] |
|
200; 300
|
|
|
| Property |
Thickness |
Value |
Units |
Test |
|
OPTICAL
|
| Haze |
200 - 300 |
1 |
% |
ASTM D1003
|
| Total Light Transmission (TLT) |
200 - 300 |
93 |
% |
ASTM D1003 |
|
|
|
PHYSICAL
|
| Elongation at Break MD |
200 - 300 |
250 |
% |
ASTM D882A |
| Elongation at Break TD |
200 - 300 |
150 |
% |
ASTM D882A |
| Tensile Strength MD (break) |
200 - 300 |
28,000 |
psi |
ASTM D882A |
| Tensile Strength TD (break) |
200 - 300 |
34,000 |
psi |
ASTM D882A |
|
|
|
THERMAL
|
| Shrinkage MD (150℃) |
200 - 300 |
0.1 |
% |
Unrestrained @150℃ / 30 min |
| Shrinkage TD (150℃) |
200 - 300 |
0.02 |
% |
Unrestrained @150℃ / 30 min |
|
|
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867
|
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.
CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.
Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.
|
|
Show Printable Version