MYLAR® HF02AT

Product Description

ProductLogo

Mylar® Harvest Fresh lidding films are specially designed for fresh cut produce sealant lidding. With superior clarity and anti-fog properties these films provide unmatched shelf appeal. Easy peel opening and customized seal / peel strength offers consumers the ultimate in convenience.

To ensure the highest level of food safety Mylar® Harvest Fresh lidding films offer broad FDA and EU regulatory compliance. Strong seals offer tamper evidence. High yield mono web film offer low area cost as well as sustainability through package reduction. Mylar® Specialty Films commitment to sustainability is evident by offering Mylar® Harvest Fresh lidding with up to 30% Post Consumer Recycle content.

Mylar® Harvest Fresh lidding films offer superior mechanical properties, such as stiffness and lay flat, providing exceptional machine efficiency. Excellent hot tack provides strong seals even when product is mounded and may also provide increased productivity. Thermal distortion in package is eliminated with the use of Mylar® Harvest Fresh lidding. Mylar® Harvest Fresh lidding can be perforated easily and more precisely then laminates providing optimal respiration of fresh cut produce for extended shelf life.

Approvals

Food Contact Status - Please contact your Mylar® Specialty Films representative to receive the Regulatory Compliance documents

Disposal

Disposal of Mylar® HF02AT does not present special disposal problems. It can be buried as a relatively inert material in a landfill or burned in an incinerator with normal refuse. The incinerator should have sufficient draft to exhaust all combustion products through the stack to avoid exposure to irritating fumes. The disposal method should comply with local, state and federal regulations.

Typical Properties

Available Thickness [Gauge] 50;    75;    100

Property Thickness Value Units Test BARRIER Gas Permeability - O2, 24 hr  50  9  cc/100 in²  ASTM D3985 22℃/75% RH/1 ATM  Gas Permeability - O2, 24 hr  75  7  cc/100 in²  ASTM D3985 22℃/75% RH/1 ATM  Gas Permeability - O2, 24 hr  100  5  cc/100 in²  ASTM D3985 22℃/75% RH/1 ATM  WVTR  50  2.8  g/100 in²/day  ASTM F1249 38℃, 90% RH  WVTR  75  1.9  g/100 in²/day   ASTM F1249 38℃, 90% RH   WVTR  100  1.3  g/100 in²/day  ASTM F1249 38℃, 90% RH    PHYSICAL Elongation at Break MD  50 - 100  110  %  ASTM D882A  Elongation at Break TD  50 - 100  80  %  ASTM D882A  Modulus  50 - 100  550  kpsi  ASTM D822  Tensile Strength MD (break)  50 - 100  25  kpsi  ASTM D882A  Tensile Strength TD (break)  50 - 100  35  kpsi  ASTM D882A  Unit Weight  50  12.5  lb/ream  ASTM E252 (0.5 m2)  Unit Weight  75  18.5  lb/ream  ASTM E252 (0.5 m2)  Unit Weight  100  22.0  lb/ream  ASTM E252 (0.5 m2)  Yield (nominal)  50  34,900  in²/lb    Yield (nominal)  75  23,400  in²/lb    Yield (nominal)  100  19,700  in²/lb

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.