MELINEX® ST725

Product Description

MELINEX® ST725 is a stablized high clarity polyester film pretreated on both sides to promote adhesion to many industrial coatings and inks. MELINEX® ST725 exhibits improved performance in multi-pass printing applications employing UV curing and offers greater ease of embossing or die cutting.

Approvals

UL Recognition - Product has been registered with Underwriters Laboratories

Typical Properties

Available Thickness [Gauge] 500;    700;    1000

Property Thickness Value Units Test OPTICAL Haze  1000  1.5  %  ASTM D1003  Haze  500  1.0  %  ASTM D1003  Haze  700  1.0  %  ASTM D1003    PHYSICAL C.O.F. (static) A-B    0.7    ASTM D1894  Tensile Strength MD (break)    20,000  psi  ASTM D882A  Tensile Strength TD (break)    20,000  psi  ASTM D882A  Yield (nominal)  500  3,968  sq in/lb    Yield (nominal)  700  2,834  sq in/lb    Yield (nominal)  1000  1,984  sq in/lb      THERMAL Shrinkage MD (150℃)    0.05  %  Unrestrained @ 150℃/30 min  Shrinkage TD (150℃)    0.02  %  Unrestrained @ 150℃/30 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.