Welcome, Guest Current Language:   US
  Home | Welcome Page | Film Type Selector | Market Locator | Product Locator
 

Show Printable Version  
 
MELINEX® TCH24UV

Product Description
MELINEX® TCH24UV is a UV stabilized high clarity polyester film with good handleability and high visible light transmission. It also blocks UV transmission below 375 nm. The film is pretreated on both sides of the film surfaces for adhesion.



Typical Properties
Available Thickness [Gauge]
500


Property Thickness Value Units Test
OPTICAL
Haze  500  < 1  ASTM D1003 
Total Light Transmission (TLT)  500  94  ASTM D1003 
UV Optical Density  500  1.1    McBeth TD904 Optical Densitometer with Wratten 18A UV filter  
 
PHYSICAL
Elongation at Break MD  500  170  ASTM D882A 
Elongation at Break TD  500  100  ASTM D882A 
Tensile Strength MD  500  27,500  psi  ASTM D882A 
Tensile Strength TD  500  31,500  psi  ASTM D882A 
Yield Strength MD 5%  500  14,500  psi  ASTM D882A 
Yield Strength TD 5%  500  15,000  psi  ASTM D882A 
 
THERMAL
Shrinkage MD (150°C)  500  1.0  Unrestrained @ 150°C/30 min  
Shrinkage TD (150°C)  500  1.0  Unrestrained @ 150°C/30 min 


Contact Info
DuPont Teijin Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836 USA
Tel: (800) 635-4639
Fax: (804) 530-9867


Disclaimer
Note: These values are typical performance data for DuPont Teijin Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. DuPont Teijin Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.

CAUTION: Do not use in medical applications involving permanent implantation in the human body (DuPont Teijin Films Medical Policy). For other medical applications, see the Medical Caution Statement. DuPont Teijin Films accepts no liability for use of it's products in medical applications not reviewed and approved by DuPont Teijin Films or for product misuse. DuPont Teijin Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.

Melinex®, Mylar® and Melinex® STTM are registered trademarks of DuPont Teijin Films U.S. Limited Partnership.
 
  Show Printable Version
 
  Copyright © 2006 DuPont Teijin Films. All rights reserved. | Privacy
  Developed and Powered by Client Centered Technologies, Inc.