Welcome, Guest Current Language:   US

Home

|

Welcome Page

|

Film Type Selector

|

Market Locator

|

Product Locator

	Show Printable Version     MELINEX® 377 Product Description MELINEX® 377 is a translucent matte film having a medium surface gloss which is suitable for creating woodgrain and muted metallic effects. Typical Applications MELINEX® 377 is suitable for use in stamping foil, metallizing, and casting/release applications. Typical Properties Available Thickness [Gauge] 48;    75;    92;    142;    200;    300;    500 Property Thickness Value Units Test OPTICAL Gloss 45 Degrees  92  38  %  ASTM D523  Haze  48  51  %  ASTM D1003  Haze  75  66  %  ASTM D1003  Haze  92  73  %  ASTM D1003  Haze  142  78  %  ASTM D1003  Haze  200  95  %  ASTM D1003  Haze  300-500  97  %  ASTM D1003  Total Light Transmission (TLT)  48  80  %  ASTM D1003  Total Light Transmission (TLT)  75  79  %  ASTM D1003  Total Light Transmission (TLT)  92  78  %  ASTM D1003  Total Light Transmission (TLT)  142  76  %  ASTM D1003  Total Light Transmission (TLT)  200  70  %  ASTM D1003  Total Light Transmission (TLT)  300-500  67  %  ASTM D1003    PHYSICAL C.O.F. (dynamic)    0.30    ASTM D1894 (A-B)  Elongation at Break TD    100  %  ASTM D882-83 (23­℃ at 50% RH, strain rate 50% min)  Tensile Strength MD (break)    24,900  psi  ASTM D882-83 (23℃ at 50% RH, strain rate 50% min)  Tensile Strength TD (break)    30,600  psi  ASTM D882-83 (23℃ at 50% RH, strain rate 50% min)  Yield Strength MD 5%    14,500  psi  ASTM D882A  Yield Strength TD 5%    15,000  psi  ASTM D882A    THERMAL Coefficient of Thermal Expansion - MD    19X10E­­-6  cm/cm/℃  Between 20-50℃  Coefficient of Thermal Expansion - TD    16X10E-6  cm/cm/℃  Between 20-50℃  Shrinkage MD (190℃)  48  3.0  %  Unrestrained @ 190℃/5 min  Shrinkage MD (190℃)  75-142  3.0  %  Unrestrained @ 190℃/5 min  Shrinkage MD (190℃)  200-500  3.0  %  Unrestrained @190℃/5 min  Shrinkage TD (190℃)  48  3.0  %  Unrestrained @ 190℃/5 min  Shrinkage TD (190℃)  75-142  0.0  %  Unrestrained @ 190℃/5 min  Shrinkage TD (190℃)  200-500  3.0  %  Unrestrained @ 190℃/5 min  Upper Melt Temperature    491-500  °F  ASTM E794-85  Contact Info Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867 Disclaimer Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.
	Show Printable Version

	Copyright © 2024 Mylar® Specialty Films. All rights reserved. | Privacy
	Developed and Powered by Client Centered Technologies, Inc.