| |
|
MELINEX® 3380 is a one-side heat sealable, opaque white polyester film which is ideal in specialty laminated card applications. This film can be heat sealed to itself and other polyesters, as well as a variety of substrates. This film is currently available at thicknessess of 600, 1000, and 1210 gauge.
|
| Available Thickness [Gauge] |
|
600; 1000; 1210
|
|
|
| Property |
Thickness |
Value |
Units |
Test |
|
OPTICAL
|
| Optical Density |
600 |
1.0 |
% |
DTF (US) Test Method 2.30.2 |
| Optical Density |
1000 |
1.5 |
% |
DTF (US) Test Method 2.30.2 |
| Optical Density |
1210 |
1.8 |
% |
DTF (US) Test Method 2.30.2 |
|
|
|
PHYSICAL
|
| Density |
All |
1.45 |
g/cm3 |
|
| Elongation at Break MD |
All |
125-200 |
% |
ASTM D882A |
| Elongation at Break TD |
All |
125 |
% |
ASTM D882A |
| Tensile Strength MD |
All |
11-15 |
kpsi |
ASTM D882A |
| Tensile Strength TD |
All |
18 |
kpsi |
ASTM D882A |
|
|
|
THERMAL
|
| Heat Seal Strength |
All |
>900 |
g/12.5mm |
DTF (US) Test Method No. 2.49 |
| Shrinkage MD (190℃) |
All |
1.0 |
% |
Unrestrained @ 190℃/5 min |
| Shrinkage TD (190℃) |
All |
0.5 |
% |
Unrestrained @ 190℃/5 min |
|
|
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867
|
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.
CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.
Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.
|
|
Show Printable Version