MELINEX® 314

Product Description
Melinex® 314 is a two-side adhesion promoting polyester film with consistently good handling properties.




Typical Properties
Available Thickness [Gauge]
92;    200


Property Thickness Value Units Test
OPTICAL
Haze  92  5.6  ASTM D1003 
Haze  200  9.0  ASTM D1003 
Total Light Transmission (TLT)  92  87.0  ASTM D1003 
Total Light Transmission (TLT)  200  85.5  ASTM D1003 
 
PHYSICAL
C.O.F. (dynamic) A-B  92  0.4    ASTM D1894 
C.O.F. (dynamic) A-B  200  0.4    ASTM D1894 (untreated to treated) 
Elongation at Break MD  92-200  150  ASTM D882A 
Elongation at Break TD  92-200  100  ASTM D882A 
Tensile Strength MD  92-200  28  kpsi  ASTM D882A 
Tensile Strength TD  92-200  36  kpsi  ASTM D882A 
Yield Strength MD  92-200  14.5  kpsi  ASTM D882A 
Yield Strength TD  92-200  14.4  kpsi  ASTM D882A 
 
THERMAL
Shrinkage MD (190℃)  92  3.5  Unrestrained @ 190℃/30 min 
Shrinkage MD (190℃)  200  2.5  Unrestrained @ 190℃/30 min 
Shrinkage TD (190℃)  92  3.5  Unrestrained @ 190℃/30 min 
Shrinkage TD (190℃)  200  0.5  Unrestrained @ 190℃/30 min 



Contact Info
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867



Disclaimer
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.

CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.

Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.