MELINEX® 301H

Product Description

Melinex® 301H is a coextruded film that is one side heat sealable and is able to accept many industrial coatings.

Approvals

UL recognized - Product has been registered with Underwriters Laboratories

Typical Properties

Available Thickness [Gauge] 48;    80;    120

Property Thickness Value Units Test OPTICAL Total Light Transmission (TLT)  48  88.7  %  ASTM D1003  Total Light Transmission (TLT)  60  88.6  %  ASTM D1003  Total Light Transmission (TLT)  80  88.6  %  ASTM D1003  Total Light Transmission (TLT)  120  88.5  %  ASTM D1003    PHYSICAL C.O.F. (dynamic) A-B    0.45    ASTM D1894  Elongation at Break MD    110  %  ASTM D882A  Elongation at Break TD    80  %  ASTM D882A  Tensile Strength MD (break)    26,000  psi  ASTM D882A  Tensile Strength TD (break)    28,000  psi  ASTM D882A  Yield Strength MD 5%    14,000  psi  ASTM D882A  Yield Strength TD 5%    13,000  psi  ASTM D882A    THERMAL Shrinkage MD (190℃)  80  3.3  %  Unrestrained @ 190℃/5 min  Shrinkage TD (190℃)  80  1.0  %  Unrestrained @ 190℃/5 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.