MYLAR® MLBT

Product Description

Mylar® MLBT is a clear, one side corona treated polyester film suitable for flexible packaging, printing and laminations. It is also the film of choice for approved medical end uses.

Approvals

Food Contact Status - Please contact your Mylar® Specialty Films representative to receive the Regulatory Compliance documents Drug Master File - This product is listed in our Drug Master File.

Typical Properties

Available Thickness [Gauge] 48;    92

Property Thickness Value Units Test OPTICAL Haze  48  4  %  ASTM D1003  Haze  92  7  %  ASTM D1003    PHYSICAL C.O.F. (dynamic) A-B  48 - 92  0.4    ASTM D1894 (untreated to treated)  Density  48 - 92  1.40  g/cc    Elongation at Break MD  48 - 92  110  %  ASTM D882A  Elongation at Break TD  48 - 92  90  %  ASTM D882A  Tensile Strength MD  48 - 92  30,000  psi  ASTM D882A  Tensile Strength TD  48 - 92  33,000  psi  ASTM D882A  Yield (nominal)  48  42,200  in²/lb    Yield (nominal)  92  21,800  in²/lb      THERMAL Shrinkage MD (150℃)  48 - 92  1.5  %  Unrestrained @ 150℃/30 min  Shrinkage TD (150℃)  48 - 92  1.5  %  Unrestrained @ 150℃/30 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.