MYLAR® EB31

Product Description
Mylar® EB31 is a smooth, matte polyester film. It does not contain any plasticizers.


General Product Info
Mylar® EB31 has low haze and intermediate gloss. This offers more realistic colors and clearer text when reverse printing. Mylar® EB31 gives a bright appearance when metalllized.




Typical Properties
Available Thickness [Gauge]
92;    200


Property Thickness Value Units Test
OPTICAL
Gloss 60 Degrees  200  67  ASTM D2457 - 90 
Gloss 60 Degrees  92  65  ASTM D2457 - 90 
Haze  200  60  ASTM D1003 
Haze  92  40  ASTM D1003 
Total Light Transmission (TLT)  200  83  ASTM D1003 
Total Light Transmission (TLT)  92  87  ASTM D1003 
 
PHYSICAL
Elongation at Break MD  200  102  ASTM D882A 
Elongation at Break MD  92  102  ASTM D882A 
Tensile Strength MD  200  20  psi  ASTM D882A 
Tensile Strength MD  92  20  psi  ASTM D882A 
 
THERMAL
Shrinkage MD (150℃)  200  1.5  Unrestrained @ 150℃/30 min 
Shrinkage MD (150℃)  92  1.5  Unrestrained @ 150℃/30 min 



Contact Info
Mylar® Specialty Films U.S. Limited Partnership
3600 Discovery Drive
Chester, VA 23836-6436 USA
Tel: (800) 635-4639
Fax: (804) 530-9867



Disclaimer
Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents.

CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use.

Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.