MYLAR® ADS

Product Description

Mylar® ADS is a heat stabilized, low shrinkage film with good web handling properties.

Approvals

UL Recognition - Product has been registered with Underwriters Laboratories.

Typical Properties

Available Thickness [Gauge] 200;    285;    300;    400;    500

Property Thickness Value Units Test ELECTRICAL Breakdown Voltage  400  13.5  kV  ASTM D149 1/4" electrode 500 V/sec 25℃ in air    OPTICAL Haze  200  29  %  ASTM D1003  Haze  300  36  %  ASTM D1003  Haze  400  43  %  ASTM D1003  Haze  500  46  %  ASTM D1003  Total Light Transmission (TLT)  300  90.2  %  ASTM D1003    PHYSICAL Density  300  1.395  g/cc  ASTM D1505  Elongation at Break MD  400  160  %  ASTM D882A  Elongation at Break TD  400  140  %  ASTM D882A  Surface Roughness  300  0.008  microns  DuPont (Ra) 0.80 mm assessment  Tensile Modulus MD  300  492,000  psi  ASTM D882A  Tensile Modulus TD  300  610,000  psi  ASTM D882A  Tensile Strength MD  300  27,700  psi  ASTM D882A  Tensile Strength MD  400  25,100  psi  ASTM D882A  Tensile Strength MD 5%  300  13,900  psi  ASTM D882A  Tensile Strength TD  300  32,600  psi  ASTM D882A  Tensile Strength TD  400  27,300  psi  ASTM D882A    THERMAL Coefficient of Hygroscopic Expansion  300  7X10^6  per % RH  40% - 80% RH  Shrinkage MD (150℃)  400  0.5  %  Unrestrained @ 150℃/30 min  Shrinkage MD (190℃)  300  2.5  %  Unrestrained @ 190℃/5 min  Shrinkage TD (150℃)  400  0.2  %  Unrestrained @ 150℃/30 min  Shrinkage TD (190℃)  300  1.0  %  Unrestrained @ 190℃/5 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.