MYLAR® 800C

Product Description

Mylar® 800C is a clear polyester film which is corona treated on one side. The corona treatment improves adhesion of inks and other substrates used in lamination.

Approvals

Food Contact Status - Please contact your Mylar® Specialty Films representative to receive the Regulatory Compliance documents

Typical Properties

Available Thickness [Gauge] 48;    75;    92

Property Thickness Value Units Test BARRIER Gas Permeability - O2, 24 hr  48  6  cc/100 in²  ASTM D1434 77℉/75% RH/1 ATM  Gas Permeability - O2, 24 hr  75  4  cc/100 in²  ASTM D1434 77℉/75% RH/1 ATM  WVTR  48  2.8  g/100 in²/day  ASTM F1249 38℃, 90% RH  WVTR  75  1.8  g/100 in²/day  ASTM F1249 38℃, 90% RH    OPTICAL Haze  48  4.0  %  ASTM D1003  Haze  75  5.5  %  ASTM D1003  Haze  92  6.0  %  ASTM D1003  Total Light Transmission (TLT)  48  89.0  %  ASTM D1003  Total Light Transmission (TLT)  75  88.0  %  ASTM D1003    PHYSICAL C.O.F. (static) A-B  48 - 92  0.5    ASTM D1895  Density  48 - 92  1.4  g/cc    Elongation at Break MD  48 - 92  110  %  ASTM D822A  Elongation at Break TD  48 - 92  90  %  ASTM D822A  Surface Tension (Minimum)  48 - 92  50  Dyne/cm  ASTM D2578  Tensile Strength MD  48 - 92  32,700  psi  ASTM D822A  Tensile Strength TD  48 - 92  34,100  psi  ASTM D822A  Yield (nominal)  48  42,200  in2/lb    Yield (nominal)  75  26,600  in2/lb    Yield (nominal)  92  21,565  in2/lb      THERMAL Shrinkage MD (150℃)  48 - 92  1.25  %  Unrestrained @ 150℃/30 min  Shrinkage TD (150℃)  48 - 92  1.25  %  Unrestrained @ 150℃/30 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.