MELINEX® 6428

Product Description

Melinex® 6428 is a high clarity polyester film. It is pretreated on both film surfaces to promote adhesion to EVA. Melinex® 6428 is a developmental film designed for the photovoltaics industry.

Typical Properties

Available Thickness [Gauge] 200;    650

Property Thickness Value Units Test BARRIER WVTR  200  0.9  g/100 in²/day  ASTM F1249 38℃, 90% RH    ELECTRICAL Dielectric Strength  200  10  kV  ASTM D149 1/4" electrode 500 V/sec 25℃ in air    OPTICAL Total Light Transmission (TLT)  200  88.5  %  ASTM D1003    PHYSICAL Area Yield  200  70  ft²/lb    C.O.F. (dynamic) A-B  200  0.4    ASTM D1894  Density  200  1.395  g/cc  ASTM D1505  Elongation at Break MD  200  160  %  ASTM D882A  Elongation at Break TD  200  160  %  ASTM D882A  Tensile Strength MD  200  28,000  psi  ASTM D882A  Tensile Strength TD  200  36,000  psi  ASTM D882A  Yield Strength MD  200  14,000  psi  ASTM D882A  Yield Strength TD  200  14,000  psi  ASTM D882A    THERMAL Shrinkage MD (150℃)  200  0.6  %  150℃ (302℉), 30 min  Shrinkage TD (150℃)  200  0.6  %  150℃ (302℉), 30 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.