MELINEX® 618

Product Description

Melinex® 618 is a super clear polyester film, pretreated on one side to promote adhesion.

General Product Info

A high clarity, non-yellow base with excellent adhesion on the pretreated surface.

Typical Applications

A very unique film with ultra high clarity for a wide range of Display applications.

Typical Properties

Available Thickness [Gauge] 500;    700;    1000

Property Thickness Value Units Test OPTICAL Haze  500  0.5  %  ASTM D1003  Haze  700  1.0  %  ASTM D1003  Haze  1000  1.0  %  ASTM D1003    PHYSICAL Elongation at Break MD  500  206  %  ASTM D882A  Elongation at Break MD  700  217  %  ASTM D882A  Elongation at Break MD  1000  200  %  ASTM D882A  Elongation at Break TD  500  119  %  ASTM D882A  Elongation at Break TD  700  132  %  ASTM D882A  Elongation at Break TD  1000  120  %  ASTM D882A  Tensile Strength MD  500  28,700  psi  ASTM D882A  Tensile Strength MD  700  28,200  psi  ASTM D882A  Tensile Strength MD  1000  26,000  psi  ASTM D882A  Tensile Strength TD  500  29,200  psi  ASTM D882A  Tensile Strength TD  700  31,300  psi  ASTM D882A  Tensile Strength TD  1000  27,000  psi  ASTM D882A    THERMAL Shrinkage MD (190℃)  500  2.4  %  Unrestrained @190℃/5 min  Shrinkage MD (190℃)  700  2.4  %  Unrestrained @190℃/5 min  Shrinkage MD (190℃)  1000  2.4  %  Unrestrained @ 190℃/5 min  Shrinkage TD (190℃)  500  1.2  %  Unrestrained @190℃/5 min  Shrinkage TD (190℃)  700  1.0  %  Unrestrained @190℃/5 min  Shrinkage TD (190℃)  1000  1.0  %  Unrestrained @ 190℃/5 min

Contact Info

Mylar® Specialty Films U.S. Limited Partnership 3600 Discovery Drive Chester, VA 23836-6436 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for Mylar® Specialty Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. Mylar® Specialty Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (Mylar® Specialty Films Medical Policy). For other medical applications, see the Medical Caution Statement. Mylar® Specialty Films accepts no liability for use of it's products in medical applications not reviewed and approved by Mylar® Specialty Films or for product misuse. Mylar® Specialty Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of Mylar® Specialty Films U.S. Limited Partnership.